Noisy garage door and tune-ups in Harrison

Noise is the earliest warning a garage door gives. It is usually a simple fix if it is dealt with in time.

Call (914) 825-0187

In short

For a noisy or jerky garage door in Harrison: lubricate hinges and rollers, keep the tracks clean, and have the balance and springs checked once a year. Worn rollers are the usual cause of noise and are quick to replace.

Inside of a double garage door with a torsion spring above it

Wear and weather in Harrison

Downtown Harrison's small garages on tight lots have doors that get bumped, patched and kept going, on hardware of several vintages. In Brentwood, mid-century steel doors have worn rollers and flattened seals. West Harrison and Silver Lake are hilly: sloped driveways carry meltwater and salt to the threshold, seals freeze down, and garages under the house stay damp enough to rust spring coils. In Purchase, large custom doors need regular re-balancing. In the gated and condo communities, doors of one age wear out together, and associations often prefer them serviced on a schedule. New Haven Line commuters open the door before dawn in the cold, which is exactly when a neglected spring breaks.

Noises worth acting on

A garage door should sound about the same every day. A change is the signal.

  • Louder than last year: rollers and hinges are wearing or dry.
  • Jerky movement with a shudder: the door is binding in the tracks or is out of balance.
  • The opener strains or hums longer: the springs have weakened and the motor is lifting more than it should.
  • Clicking at one spot in the travel: a cracked hinge or a flat-spotted roller.

Simple upkeep between visits

Three things are safe for any homeowner: lubricating the hinges and rollers with a product made for garage doors, wiping the tracks and the sensor lenses clean, and testing that the door reverses when it meets an obstacle or when the sensor beam is broken.

Three things are not: adjusting springs, loosening the bottom brackets where the cables attach, and removing a section's hinges while the door is under tension. Those are where injuries happen.

What happens during maintenance

Balance test, spring adjustment, hardware tightened, rollers and hinges checked for wear, cables checked for fraying, tracks cleaned and aligned, everything that should be lubricated is, and the opener's safety features are tested. Swapping noisy steel rollers for nylon ones is the single change that quiets most doors. Nothing is replaced without your say, and the price comes first.

Around Harrison

  • West Harrison: Along Lake Street near Silver Lake Park, with mid-century houses, colonials and townhouses.
  • Silver Lake: A sought-after section of West Harrison with newer colonials and townhome communities.

See the full Harrison service area.

Leave the door where it is and call.

Springs and cables hold a lot of tension. Don't lift the door by hand or keep pressing the opener; call and we'll book a technician.

Call (914) 825-0187
Call (914) 825-0187